In situ observation of synthesized nanoparticles in ultra-dilute aerosols via X-ray scattering

In-air epitaxy of nanostructures (Aerotaxy) has recently emerged as a viable route for fast, large-scale production. In this study, we use small-angle X-ray scattering to perform direct in-flight characterizations of the first step of this process, i.e., the engineered formation of Au and Pt aerosol nanoparticles by spark generation in a flow of N₂ gas. This represents a particular challenge for characterization because the particle density can be extremely low in controlled production. The particles produced are examined during production at operational pressures close to atmospheric conditions and exhibit a lognormal size distribution ranging from 5–100 nm. The Au and Pt particle production and detection are compared. We observe and characterize the nanoparticles at different stages of synthesis and extract the corresponding dominant physical properties, including the average particle diameter and sphericity, as influenced by particle sintering and the presence of aggregates. We observe highly sorted and sintered spherical Au nanoparticles at ultra-dilute concentrations (< 5 × 10⁵ particles/cm³) corresponding to a volume fraction below 3 × 10^–10, which is orders of magnitude below that of previously measured aerosols. We independently confirm an average particle radius of 25 nm via Guinier and Kratky plot analysis. Our study indicates that with high-intensity synchrotron beams and careful consideration of background removal, size and shape information can be obtained for extremely low particle concentrations with industrially relevant narrow size distributions.

     

Identification of a gene that causes primary open angle glaucoma

Glaucoma is a major cause of blindness and is characterized by progressive degeneration of the optic nerve and is usually associated with elevated intraocular pressure. Analyses of sequence tagged site (STS) content and haplotype sharing between families affected with chromosome 1q-linked open angle glaucoma (GLC1A) were used to prioritize candidate genes for mutation screening. A gene encoding a trabecular meshwork protein (TIGR) mapped to the narrowest disease interval by STS content and radiation hybrid mapping. Thirteen glaucoma patients were found to have one of three mutations in this gene (3.9 percent of the population studied). One of these mutations was also found in a control individual (0.2 percent). Identification of these mutations will aid in early diagnosis, which is essential for optimal application of existing therapies.     

Heat transfer and pressure drop in a new type of corrugated channels

An experimental investigation of heat transfer and pressure drop from a new type of corrugated channels is presented. The investigation has been carried out for Reynolds numbers in the range of $\text{800 <}\text{Re}\text{< 5000}$ for one corrugated and one smooth channel. It is found that the heat transfer from the corrugated channel is up to 3.5 times higher than for the smooth one. The pressure drop is however large (5 – 6 times the value of a smooth channel) and it is suggested that the corrugation height and length should be altered in order to balance the increases in heat transfer and pressure drop.     

Testing for the equivalence of factor covariance and mean structures: The issue of partial measurement invariance.

Addresses issues related to partial measurement invariance using a tutorial approach based on the {lisrel} confirmatory factor analytic model. Specifically, we demonstrate procedures for (a) using "sensitivity analyses" to establish stable and substantively well-fitting baseline models, (b) determining partially invariant measurement parameters, and (c) testing for the invariance of factor covariance and mean structures, given partial measurement invariance. We also show, explicitly, the transformation of parameters from an all-X to an all-Y model specification, for purposes of testing mean structures. These procedures are illustrated with multidimensional self-concept data from low (n?=?248) and high (n?=?582) academically tracked high school adolescents. (PsycINFO Database Record (c) 2011 APA, all rights reserved)     

Phtocrosslinking of polyethylene for production of thin wall insulated wire

A photocrosslinking precess for polyethylene and its industrial irradiation apparatus has recently been developed and used successfully in the manufactre of thin wall crosslinked polyethylene-insulated wires. Polyethylene (PE) resin with the desired amounts of additives, such as photoinitiator, multifunctional crosslinker, and antioxidant is mixe homogeneously. The amixture of PE is granulated, and then extruded on a conductor wire. The coated PE layer in the melt is subsequently irradiated in a specially designed UV irradiation apparatus for 5 to 10 s. The studies show that the photocrosslinked PE-insulation high voltage television wires produced by this new technique possess excellent electrical and mchanical properties and much lower operating cost compared with wires produced by the electron beam crosslinking technique.     

CeO2−CoO Phase Diagram

Phase equilibria in the CeO₂−CoO system at temperatures above 1500°C were investigated. The microstructures and the phase compositions of the DTA (differential thermal analysis) samples and the quenched solid pellets were analyzed using SEM (scanning electron microscope), EDX (energy dispersive X-ray), and WDX (wavelength dispersive X-ray). A eutectic reaction was found at 1645 ± 5°C. The eutectic point was calculated to be at 82 ± 1.5 mol% CoO. The eutectic phases were the CeO₂-rich phase (containing <5 mol% CoO) and the CoO-rich phase (containing ∼0.5 mol% CeO₂). At 1580°C, the solubility of CoO in CeO₂ was ∼3 mol%.     

EVALUATION OF A METHOD FOR MEASURING MIXING TIME USING NUMERICAL SIMULATION AND EXPERIMENTAL DATA

A method for measuring mixing performance in large-scale vessels is investigated. The method is evaluated experimentally in a pilotscale reactor and by using a model based on the three-dimensional calculation of the flow field. The method is based on injection of a tracer and measuring the concentration with several detectors at different locations. The mixing performance is measured as the decay rate of the difference between the concentration at the detectors and the final concentration.

The model predicts a strong dependence on injection point. The assumption of a first-order decay rate of the concentration deviation is more appropriate for some injection points.     

Gas-liquid mass transfer in taylor flow through a capillary

The gas-liquid mass transfer in two-phase flow through a capillary has been measured for water-air, ethanol-air and ethylene glycol-air systems. A semi-theoretical model has been developed and compared with experimental results. and a full computer simulations of the flow pattern and mass transfer using a flow simulation program have been made. The measured values are about 30% less than the calculated values.